🎁 Holiday offer: every Blackline wheelset or Ready to Ride set ordered Oct 20, 2026 to Jan 3, 2027 includes a $75 Rippin Moto gift card, sent with your build certificate and good on rippinmoto.com. It never expires. Not valid with discount codes.
Blackline Ready-to-Ride Off-Road Wheelset
Choose a Blackline off-road wheelset for Stark Varg with the listed tires and tubes mounted before shipment. We complete tire mounting in our Redmond, Oregon shop so you can skip that step when the set arrives.
Allow approximately 3-4 weeks for the build and tire mounting, plus an estimated 5-7 business days in transit.
Fits the Stark Varg.
Specs
- Rims: 7116-T6 aluminum, a 7000-series alloy
- Hubs: machined 6082-T6 aluminum
- Spokes: stainless steel
- Spoke nipples: aluminum
- Hub and spoke nipple accent colors: Black, Silver, Magnesium, Red, Blue, Gold, Purple, Green
- Sizes on this page: 21 x 1.60 in Front / 18 x 2.15 in Rear; 21 x 1.60 in Front / 19 x 2.15 in Rear; 21 x 1.60 in Front / 19 x 2.50 in Rear
- Tires: included and mounted, see the pairings below
What is included
- Front and rear Blackline wheels
- Tires, mounted, as listed in the pairings below
Note: Brake rotors and rear sprocket are not included. Installation and any required hardware transfer are still needed. Check the selected configuration for axle spacers and clearance requirements.
Included Tire Pairings
Every Ready-to-Ride option is pre-configured and includes tires. Your set arrives with the tire pairing listed here for the bike and size you select.
| Bike Model | Wheel Size (Front / Rear) | Included Tires (Front / Rear) |
|---|---|---|
| Stark Varg | 21 x 1.60 in Front / 18 x 2.15 in Rear | Kenda Washougal III, 90/100-21 front / 100/100-18 rear |
| Stark Varg | 21 x 1.60 in Front / 19 x 2.15 in Rear | Kenda Washougal III, 80/100-21 front / 110/90-19 rear |
| Stark Varg | 21 x 1.60 in Front / 19 x 2.50 in Rear | Kenda Washougal III, 80/100-21 front / 120/80-19 rear |
How it is built and shipped
Ready-to-Ride sets are built to Rippin Moto's specification by our wheel builder, then come to our shop in Redmond, Oregon so we can mount the tires before the set ships to you.
Our current lead time is 3-4 weeks to build with tires mounted, then an estimated 5-7 business days in transit after shipment. The Magnesium finish adds about five additional business days to the build time. If you need the set by a specific date, contact us before you order so we can confirm timing.
You will get tracking by email once the set ships.
Not sure which option you need
Send us your bike model and year and we will confirm the right configuration before you order.
Anodized-part care
Wash anodized parts with mild soap and water only. Do not use sodium hydroxide (caustic soda)-based cleaners, including wheel cleaners or iron removers that contain sodium hydroxide. These chemicals can damage the anodized finish and cause discoloration or fading. Six-month warranty coverage for anodized parts requires proper care; damage caused by improper cleaning is not covered.