- Sold as a matched pair — the factory only badges the driver-side glass; this set lets you run "Built in Hambach" on both rear side windows for a symmetrical look.
- Built to near-factory spec — same clean typography and blue/white/red tricolor bar, engineered to sit right alongside the OEM decal.
- Air-egress channel adhesive — micro-channels release trapped air so it lays down bubble-free with a squeegee.
- Made for glass — a quick wet install (soapy-water float) makes positioning effortless and forgiving.
- Made in the USA — a StickerFab in-house product, printed and cut in our own shop.
"Built in Hambach" Window Decal Set (Pair)
Give both rear windows the badge — not just the one INEOS gives you from the factory.
Match Both Sides, FinallyFrom the factory, your Grenadier wears its "Built in Hambach" badge on a single window. Great — if you only ever look at one side of your truck. This set gives you a second decal built to very similar specifications, so both rear side windows carry the mark and the whole vehicle reads as intentional. If you've got a little OCD about symmetry (and let's be honest, a lot of Grenadier owners do), this is the fix. |
|
|
Done Right, Down to the DetailCrisp lettering, correct proportions, and the blue / white / red tricolor bar — printed to sit shoulder-to-shoulder with the OEM decal without looking like an aftermarket afterthought. The adhesive is an air-egress vinyl, so the micro-channels push trapped air out to the edges as you squeegee it down. No bubbles, no fighting it. |
See It On the Glass
💧 Installation — Wet Install on Glass
Because it's going on glass, we recommend a quick wet install — it makes positioning easy and forgiving:
- Work in 65°F or warmer — vinyl and adhesive behave best above that.
- Clean the glass thoroughly; a fresh alcohol wipe beats glass cleaner (no residue).
- Mist the glass with a light soapy-water solution (a drop of dish soap in water).
- Float the decal into position — the wet surface lets you slide it to line up with the OEM side.
- Squeegee firmly from the center out, pushing water and air to the edges.
- Let it dry fully before flexing or washing. The air channels finish releasing as it cures.
FAQ
|
How many decals come in the set? Will it match my factory decal? |
Do I have to wet-install it? What temperature should I install at? Where is it made? |