The Tuttio Soleil 01 foot brake kit moves your rear brake off the bar and under your foot, the way a dirt bike is built to stop. It ships pre-bled and ready to bolt-on and ride. The Tuttio Soleil 01 foot brake kit is designed specifically to fit the Tuttio, no custom fabrication required or wire cutting required.
What's in the box?
- Pre-bled foot brake assembly, HSK master cylinder, Ultra Bee Brake Caliper, Steel braided brake line
- Foot brake bracket, lever, and peg
- Single caliper bracket, or optional dual caliper bracket to add an Ultra Bee hand brake
- All mounting hardware required
Specs:
- Foot brake bracket, lever, and peg machined from 6061-T6 aluminum
- Dual caliper bracket made from 6061-T6 aluminum
- Ships pre-bled with Motul DOT 5.1 brake fluid: high boiling point, ready to ride
- Uses your Soleil 01's stock 190mm rotor, so there is no rotor swap
- HSK master cylinder for consistent lever feel
Fits These Models:
- Tuttio Soleil 01 (all years)
Tuttio foot brake kit FAQ
Will this foot brake kit fit my Tuttio Soleil 01?
Yes. It is built for the Soleil 01 and bolts to the factory mounting points on all years. It uses your stock 190mm rotor. It is made for the Soleil 01 only.
Do I need any other parts to install it?
No. The kit is complete: pre-bled HSK master cylinder, steel braided line, caliper, single or dual caliper bracket, foot brake bracket, lever, peg, and hardware. It uses your stock 190mm rotor, so nothing else is required.
Can I reuse my existing hand brake assembly?
No. The kit includes its own pre-bled master cylinder for the foot brake. If you want to keep your bar hand brake and run a foot brake at the same time, choose the dual caliper bracket, and get the Surron Ultra Bee Rear Brake Assembly.
Single or dual caliper bracket: which do I need?
Single runs one rear caliper for a foot brake setup. Dual mounts a second caliper so you can add a Ultra Bee hand brake as well. Most riders run the dual.
Is it really pre-bled and ready to ride?
Yes. It ships pre-bled with Motul DOT 5.1 fluid. Bolt it on, route the line, and ride. No cutting and no fabrication.
OEM Ultra Bee or Custom FactoryZ caliper: what is the difference?
Both are direct-fit and pre-bled. OEM Surron Ultra Bee is the factory caliper. Custom FactoryZ is our own machined and finished version.
Does it use a bigger rotor?
No. The foot brake kit runs your Soleil 01's stock 190mm rotor, so there is no rotor swap. A larger rotor is a separate brake upgrade.
Install Guide:
Bolt-on install, no cutting or fabrication. Watch the full step-by-step install below, and find every guide in our install video library. See all Tuttio Soleil 01 upgrades.
Ships from USA!
Updated ~ 06/24/2026